Vibration Unit Converter (Acc / Vel / Disp)

Translate spectrum analyzer readings between g, m/s², mm/s, in/s, µm, and mils instantly.

How do you convert between Vibration Acceleration, Velocity, and Displacement?

For harmonic sinusoidal motion at angular frequency ω = 2πf: v = ω · d and a = ω · v = ω² · d. RMS converts to peak via: Peak = √2 × RMS.

100% In-Browser Execution — Zero Server Storage.

Signal Inputs

Frequency (f)

3000 RPM

Velocity (RMS)

mm/s

ISO 10816-3 Severity Classification

B (Acceptable)

Acceleration (g Peak):0.190 g

Displacement (Pk-Pk):37.8 µm

ISO 10816 & ISO 20816 Vibration Severity Standards

Condition monitoring vibration analysts frequently need to translate between accelerometer g levels, overall velocity (mm/s RMS or in/s peak), and eddy current displacement probes (microns pk-pk).

Engineering & Regulatory Notice: The calculations, projections, and failure models provided in this suite are for engineering estimation and educational purposes. Verify all calculations and assumptions independently before making operational, equipment replacement, safety-critical, or regulatory compliance decisions.

Recommended Next Steps in Reliability Workflow

Mechanical Engineering Reference

ISO 281 Bearing Life (L10 & L10h)

Estimate fatigue life and assess bearing sizing under radial, axial, and dynamic load conditions.

Maintenance Planning & Strategy

P-F Interval & Inspection Planner

Establish non-destructive inspection frequencies that guarantee early failure detection.